Care And Cleaning - AquaPRO 40011-3 Manual Del Usuario

CARE AND CLEANING

WARNING:
Risk of electric shock. Can shock, burn or kill. Do not lift pump by power cord.
For 40011-3, 41011-3
Before removing pump from basin for service, always disconnect

electrical power to pump and control switch.
 Submerge pump in a disinfectant solution (bleach) for at least one hour
before disassembling pump.
 Unscrew the stainless bolts, and remove the volute/gasket.
Use a flathead screwdriver to hold the shaft, then turn the impeller

counter clockwise to release the impeller.
Remove debris from around the shaft and on/under the impeller.

Reassemble the pump.

For 41021-3
 Before removing pump from basin for service, always disconnect
electrical power to pump and control switch.
Submerge pump in a disinfectant solution (bleach) for at least one hour

before disassembling pump.
Put the pump upside down.

Note: Pump is oil filled, don't incline the pump to void the oil leakage.
 Unscrew the stainless screws, and remove the volute/gasket.
Use a flathead screwdriver to hold the shaft, then turn the impeller

counterclockwise to release the impeller.
 Remove debris from around the shaft and on/under the impeller.
Reassemble the pump.

6 For Professional Technical Support call 1-844-242-2475