Safety Instructions; Important - BORETTI BPON 45 Instrucciones

1 - Safety Instructions

EN

IMPORTANT

The oven's data plate is accessible even with the oven fully
installed. The plate is visible simply by opening the door.
Always quote the details from it to identify the appliance
when ordering spare parts.
• Do not disassemble any parts prior to having disconnected
the oven from the mains.
• Do not use the appliance if any part is broken (for example a
glass). Disconnect it from the mains and call service.
• Before using the oven, it is recommended to make it operate
at noload at the maximum temperature for an hour to
eliminate the insulating material odour.
• In all models, leave the door closed when the grill is used.
2
• The cooling fan may remain in operation so long as the oven
is hot, even after it has been switched off.
• During the use the appliance becomes very hot; don't touch
the heating elements inside the oven.
• Parents and adults should pay particular attention when
using the product in presence of children.
• Children should be overseen so as to ensure that they don't
play with the equipment.
• Keep children under age 8 away, unless constantly
supervised.
• This appliance is not intended for use by persons (including
children over age 8) with reduced physical sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsable for their safety.
• Children may not perform cleaning and maintenance
unsupervised.
• In order to avoid damage to the oven enamel coat, do not
cover the oven muffle sole with any item (e.g. aluminum foil,
pans and the likes).
• Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the oven door glass since they can scratch the
surface, which may result in shattering of the glass.
• Abrasive detergents and steam cleaning equipment should
not be used for cleaning.
• The appliance must not be installedbehind a decorative door
in order to avoid overheating.
• WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
• The oven is cool and power to the oven has been turned off
before removing the door. Failure to do so could result in
electrical shock or burns.
• Use only the meat probe supplied with the appliance.
IMPORTANT
If the oven is installed in an ambient temperature below 37
°F (3 °C), F*0117 may appear; when a higher ambient
temperature is reached, the error will no longer appear.