Operation Procedure - Rival KOR-9G3A Manual Del Usario

OPERATION PROCEDURE

This section includes useful information about oven operation.
Plug power supply cord into a standard 3-pronged
1
12.5 Amp, 120V AC, 60Hz power outlet.
2
After placing the food in a suitable container,
open the oven door and put it on the glass tray.
The coupler, glass tray and roller guide must
always be in place during cooking.
3
Close the door. Make sure that it is firmly closed.
4
The oven light is on when the microwave oven is
operating.
The oven door can be opened at any time during
5
operation by pushing the door open button of
control panel. The oven will automatically shut off.
6 Each time a pad is touched, a BEEP will sound to
acknowledge the touch.
The oven automatically cooks at full power unless
7
set to a lower power level.
8
The display will show " : 0 " when the oven is
plugged in.
WATTAGE OUTPUT CHART
•
A power level of microwave cook is entered by pressing POWER pad.
Please refer to the chart below.
Touch the POWER LEVEL pad
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
Time clock returns to the present time when the
19
cooking time ends.
10
When the STOP/CLEAR pad is touched during oven
operation, the oven stops cooking and all information
is retained. To erase all information (except the
present time), touch the STOP/CLEAR pad once
more. If the oven door is opened during the oven
operation, all information is retained.
If the START pad is touched and the oven does not
11
operate, check the area between the door and door
seal for obstructions and make sure the door is
closed securely. The oven will not start cooking until
the door is completely closed or the program has
been reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.
Power Level (Display)
P-HI
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P-00
8
Approximate Percentage of Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%