Promax PROWATCH TELMO Manual De Instrucciones página 45

USER'S MANUAL. PROWATCH
[6] LED ON
It shows if the ProWatch has been supplied. If this LED is lighting up, does not
mean that the equipment is monitoring, It just means that the power supply is
correct.
[7] LED ACTIVITY
This LED lights up when the ProWatch
with some of the active channels. If this flag does not shine it could mean:
1) There are not active channels
2) There are not RF signal
3) The equipment is not properly configured.
[8] Clear
Press this button to clear all the Warnings and alarms.
[9] Reset
Press this button to restart completely the system, (Hardware Reset).
[10] DinClip Connector (Only for equipment DIN Rail)
Ground connector. It must be connect before switch on the equipment.
[11] AC Voltage connector and main switch (Only for 19 " Rack equipment).
It allows the supply of the equipment through the mains. The main switch
connects and disconnects the 230 AC. (Only for equipment Rack 19 ").
Range: 90-250 VAC.
The fuse holder is included
[12] Ethernet Connector (Only for 19 " Rack equipment).
Ethernet SNMP connector use to the remote communication of the system with a
PC
03/2008
TELMO
TELMO is monitoring and synchronized
Page 13