Maintenance; Mains Fuse Replacement (Only 19" Rack ); Cleaning Recommendations - Promax PROWATCH TELMO Manual De Instrucciones

USER'S MANUAL. PROWATCH

MAINTENANCE

6
6.1

Mains fuse replacement (Only 19" Rack )

The fuseholder is located on the rear panel of the equipment.
Before replacing the fuse disconnect the mains cord.
Take out the fuse holder with screwdriver. Replace the fuse damaged by a
suitable new one and place afresh the fuseholder.
THE BREACH OF THESE INSTRUCTIONS COULD DAMAGE THE EQUIPMENT.
6.2

Cleaning Recommendations

To clean the cover, take care the instrument is disconnected.
Do not use scented hydrocarbons or chlorized solvents. Such products may attack the
materials used in the construction of the cover.
The cover should be cleaned by means of a light solution of detergent and
water applied with a soft cloth.
Dry thoroughly before using the system again.
Do not use for the cleaning of the front panel, alcohol or its derivatives. These products
can attack the mechanical properties of the materials and diminish their useful time of
life.
03/2008
TELMO
Fuse 5x20 2A T 250V
CAUTION
CAUTION
CAUTION
Page 21