FAAC TM2 X TT-50 Manual De Instrucciones página 31

See GLOSSARY for the association of the type of group with the action - Device type/group.
To save setups: SAVE.
How to associate a device with a scenario:
Main menu / Programming / Scenarios / CREATED SCENARIO / Device commands
The list of existing devices is shown. Select the desired device or devices and associate it
with the required action. After selecting, the system automatically goes back to the last
screen. To go back to the list of devices: BACK.
See also GLOSSARY for the association of the type of device with the action – Device
type/group.
To save setups: SAVE.
ATTENTION! Within the same scenario, one device can be programmed indipendently
from the other devices of the same group.
Example:
In a room (dining room) having 5 blinds, normally managed as a group, you may want
to program the closing of 4 blinds and the opening of 1 blind at a special time of day
(e.g. in the evening).
EVENING Scenario:
DINING ROOM group (devices A, B, C, D, E)

A device UP command
The setup of each individual device always prevails.
The other items of the Modify Scenario menu are as follows:
- Modify: to change the name of a scenario
- Delete: to delete a scenario
DAYS
The creation of one or more days is very important in order to be able to create a week
and to use the daily or weekly automation later (see AUTOMATION for further details).
How to create a new day:
Main menu / Programming / Days / NEW
- "Name" to customize the name of the day (max. 16 characters). Create the desired
name using the keyboard. To quit: ENTER.
To save the day: SAVE.
How to associate scenarios with a day:
Main menu / Programming / Days / CREATED DAY / Setup scenarios
An empty list of scenarios is shown.
TM2 X TT-50

DOWN command
31 A4518_6H04_Rev.A