cONTROLLING ThE TEMPERATuRE
Basic temperature of Freezer and Refrigerator
compartments
The basic temperature and recommended
temperatures of the Freezer and Refrigerator
Compartments are -4°F(-20°C) and 38°F(3°C)
respectively.
If the temperature of the Freezer or Refrigerator
Compartments are too high or low, adjust the
temperature manually.
controlling the Freezer temperature
Recommend Temp (Freezer) : -4°F(-19°c)
You can set the Freezer temperature between -8°F(-
22°C) and 10°F( -12°C) to suit your particular needs.
Touch the Freezer button repeatedly until the desired
temperature is shown in the temperature display. The
temperature will move 2°F(1°C) degrees with each
Touch as follows: -4°F → -6°F → -8°F → -10°F → 8°F
→ 6°F → 4°F → 2°F → 0°F → -2°F → -4°F) (-20°C →
-21°C → -22°C → -12°C → -13°C → -14°C → -15°C
→ -16°C → -18°C → -19°C → -20°C. Keep in mind
that foods such as ice cream can melt at 4°F(-15°C).
The temperature display will move sequentially from
-8°F(-22°C) to 10°F(-12°C).
controlling the fridge temperature
Recommend Temp (Fridge) : 38°F(3°c)
14_ operating
You can set the fridge temperature between 46°F(8°C)
and 34°F(1°C) to suit your particular needs. Touch the
Fridge button repeatedly until the desired temperature
is shown in the temperature display. The temperature
will move 2°F(1°C) degrees with each touch as
follows: 38°F → 36°F → 34°F → 46°F → 44°F →
42°F → 40°F → 38°F (3°C → 2°C → 1°C → 8°C →
6°C → 5°C → 4°C → 3°C). The temperature control
process for the Fridge works just like the Freezer
process. Touch the Fridge button to set your desired
temperature. After a few seconds, the Fridge will begin
adjusting towards the newly set temperature. This will
be reflected in the digital display.
- The temperature of the Freezer or Fridge may
rise when you open the doors too frequently,
or if a large amount of warm or hot food is
placed inside.
-
This may cause the digital display to blink. Once
the Freezer and Fridge temperatures return to their
normal set temperatures, the blinking will stop.
-
If the blinking continues, you may need to "reset"
the Refrigerator. Try unplugging the appliance, wait
for around 10 minutes, and then plug the power
cord back in.
-
If there is a communication error between the
Display and Main Controller, the Convertible
Display light may blink. If the blinking continues for
a long period of time, please contact a Samsung
Electronics Service Center.
hOW TO uSE ThE DISPENSER
Push the appropriate Ice Type button or
the Water button to select what you want
dispensed.
NO IcE
Select this if you want to turn ice
maker off