Fujitsu SPARC Enterprise T5140 Guía De Administración página 48

7. Configure la nueva unidad de disco.
Escriba el comando siguiente:
# cfgadm -c configure Id-punto-conexión
Por ejemplo:
# cfgadm -c configure c1::dsk/c1t3d0
El LED de actividad (verde) parpadea cuando el nuevo disco de c1t3d0 se añade
al árbol de dispositivos.
8. Compruebe si la unidad de disco duro nueva se ha agregado al árbol de
dispositivos.
Escriba el comando siguiente:
# cfgadm -al
Ap_Id
c1 scsi-bus
c1::dsk/c1t0d0 disk
c1::dsk/c1t1d0 disk
c1::dsk/c1t2d0 disk
c1::dsk/c1t3d0 disk
c1::dsk/c1t4d0 disk
c1::dsk/c1t5d0 disk
c1::dsk/c1t6d0 disk
c1::dsk/c1t7d0 disk
usb0/1
usb0/2
usb0/3
usb1/1
usb1/2
usb2/1 unknown
usb2/2 usb-storage
usb2/3 unknown
usb2/4 usb-hub
usb2/4.1
usb2/4.2
usb2/4.3
usb2/4.4
usb2/5 unknown
#
Observe que, ahora, el dispositivo c1t3d0 aparece como configured (configurado).
Type Receptacle
connected configured unknown
connected
connected
connected
connected
connected
connected
connected
connected
unknown
unknown
unknown
unknown
unknown
empty
connected
empty
connected
unknown empty
unknown empty
unknown empty
unknown empty
empty
Occupant
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
empty unconfigured ok
empty unconfigured ok
empty unconfigured ok
empty unconfigured ok
empty unconfigured ok
unconfigured ok
configured ok
unconfigured ok
configured ok
unconfigured ok
unconfigured ok
unconfigured ok
unconfigured ok
unconfigured ok
Administración de discos
Condition
33