Sunlight Simulation - SOMFY Sunis indoor WireFree RTS Guia De Instalacion

Installation guide
5.3.2. On the inside surface of a window
1) Screw the suction cup to the back of the
sensor (C).
2) Moisten the suction cup.
3) Position the sensor below the area to be
protected by the end-product (D) and press
on the sensor.

5.4. Sunlight simulation

If you turn the potentiometer to the (-) position,
the sensor simulates continuous sunlight,
the LED glows green and the end-product is
lowered, stops level with the sensor and is then
raised slightly above the level of the sensor.
Do not leave the sunlight threshold setting at this level.
Copyright © 2010 Somfy SAS. All rights reserved.
Sunis indoor WireFree™ RTS
C
D
7