Onkyo HTP-993 Guia De Inicio Rapido página 4

Paquete de altavoces de cine en casa de 7.1 canales
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Specifications
Powered Subwoofer (SKW-980: North American
models/SKW-938: European models)
Type
Acoustic suspension
Rated output power
125 watts minimum continuous power,
(FTC)
6 ohms, driven at 100 Hz with a maximum
total harmonic distortion of 1% (SKW-
980)
Rated output Power
125 watts minimum continuous power,
(IEC)
6 ohms, driven at 100 Hz with a maximum
total harmonic distortion of 1% (SKW-
938)
Input sensitivity/
280 mV/20 k
impedance
Frequency response
20 Hz to 100 Hz
Cabinet capacity
49 L (1.73 cubic feet)
Dimensions (W × H × D) 380 mm × 444 mm × 429 mm
14-15/16" × 17-1/2" × 16-7/8"
(incl. grille and projection)
Weight
15.5 kg (34.2 lbs.)
Drivers unit
30 cm (12") Cone Woofer
Power supply
AC 120 V, 60 Hz (SKW-980)
AC 230 V, 50 Hz (SKW-938)
Power consumption
140 W (SKW-980)
137 W (SKW-938)
Grille
Fixed
Other
Auto Standby function
Non-magnetic shielding
Front Speakers (SKF-980)
Type
2 Way Acoustic suspension
8 
Impedance
W
Maximum input power
Sensitivity
83 dB/W/m
Frequency response
50 Hz to 45 kHz
Crossover frequency
2 kHz
Cabinet capacity
7.5 L (0.265 cubic feet)
Dimensions (W × H × D) 158 mm × 433 mm × 199 mm
6-1/4" × 17-1/16" × 7-13/16"
(incl. grille and projection)
Weight
5.3 kg (11.7 lbs.)
Drivers unit
12 cm (5") A-OMF Cone Woofer × 2
2.5 cm (1") Soft Dome Tweeter × 1
Terminal
Binding post (Banana type supported)
Other
Magnetic shielding
Center Speaker (SKC-980)
Type
2 Way Acoustic suspension
8 
Impedance
Maximum input power
130 W
Sensitivity
83 dB/W/m
Frequency response
50 Hz to 45 kHz
Crossover frequency
2 kHz
Cabinet capacity
7.5 L (0.265 cubic feet)
Dimensions (W × H × D) 433 mm × 158 mm × 199 mm
17-1/16" × 6-1/4" × 7-13/16"
(incl. grille and projection)
Weight
5.3 kg (11.7 lbs.)
Drivers unit
12 cm (5") A-OMF Cone Woofer × 2
2.5 cm (1") Soft Dome Tweeter × 1
Terminal
Binding post (Banana type supported)
Other
Magnetic shielding
Surround Speakers (SKR-980)/
Surround Back Speakers (SKB-980)
Type
2 Way Acoustic suspension
8 
Impedance
Maximum input power
130 W
Sensitivity
81 dB/W/m
Frequency response
50 Hz to 45 kHz
Crossover frequency
2 kHz
Cabinet capacity
4.6 L (0.163 cubic feet)
Dimensions (W × H × D) 200 mm × 275 mm × 169 mm
7-7/8" × 10-13/16" × 6-5/8"
(incl. grille and projection)
Weight
3.5 kg (7.7 lbs.)
Drivers unit
13 cm (5-1/8") A-OMF Cone Woofer × 1
2.5 cm (1") Soft Dome Tweeter × 1
Terminal
Binding post (Banana type supported)
Other
Non-magnetic shielding
Specifications and appearance are subject to change
without prior notice.
THX and the THX logo are trademarks of THX Ltd.,
registered in the U.S. and other countries.
En-4
Use with a TV set
In general, Braun tubes used for color television sets, etc.
are extremely sensitive and can be affected even by the
magnetism of the earth. If a speaker system is used near
them, therefore, discoloring or distortion of pictures will
occur.
For magnetic shielded speakers (Front speakers, Center
speaker):
The speakers are shielded to prevent discoloration. In some
situations, however, discoloration may still be an issue, in
which case you should turn off your TV or monitor, wait
15 to 30 minutes, and then turn it back on again. This
normally activates the degaussing function, which
neutralizes the magnetic field, thereby removing any
discoloration effects. If discoloration problems persist, try
moving the speakers away from your TV or monitor.
For non-magnetic shielded speakers (Powered
subwoofer, Surround speakers, Surround back
speakers):
Try moving the speakers away from your TV or monitor. If
discoloration should occur, turn off your TV or monitor,
wait 15 to 30 minutes, and then turn it back on again. This
normally activates the degaussing function, which
neutralizes the magnetic field, thereby removing any
discoloration effects.
Tabla de contenido
loading

Tabla de contenido