Component Identification - Landa PE Serie Manual De Instrucciones

PE SERIES PRESSURE WASHER
4
WARNING: High pressure spray
WARNING
can cause paint chips or other
particles to become airborne and
fly at high speeds.
10. Eye safety devices and foot pro-
tection must be worn when us-
USE PROTECTIVE
ing this equipment.
EYEWEAR WHEN
OPERATING.
11. Machines with spray gun should not be operated with
the trigger in the off position for extensive periods of
time as this may cause damage to the pump.
12. Protect from freezing.

COMPONENT IDENTIFICATION

Water Supply Hose
(not included)
Start/Stop
Switches
Power
Supply
GFCI
Nozzle
Quick
Coupler
Power
Cord
13. Be certain all quick coupler fittings are secured be-
14. Do not allow acids, caustic or abrasive fluids to pass
15. Inlet water must be cold and clean fresh water.
16. To reduce the risk of injury, close supervision is nec-
17. The best insurance against an accident is precau-
18. LANDA will not be liable for any changes made to
Oil Level
Sight Glass
Oil
Dipstick
Pressure Nozzle
Soap
Nozzle
LANDA PE • REV 10/02
OPERATOR'S MANUAL
fore using pressure washer.
through the pump.
essary when a machine is used near children. Do
not allow children to operate the pressure washer.
This machine must be attended during opera-
tion.
tion and knowledge of the machine.
our standard machines or any components not pur-
chased from LANDA .
Detergent
Detergent
Tube
Wand
Trigger
High Pressure Hose
Injector
Inlet
Connector
Detergent Bucket
(not included)
Spray
Gun
Swivel
Connector