Door Label Example - Brother P-touch 2200 Guía De Usuario

After you have inserted the batteries and the enclosed tape cassette as explained in the Getting
Started chapter, let's practice using some of the basic functions of your P-touch. We must first
begin by turning on the power to the machine.
To turn on the machine:
1
Press
of the keyboard.
The underline in the LCD display is called the "cursor". It is like a pointer which shows your
current position and lets you select characters in your text.
The text you create may sometimes be longer than the 11 characters that the LCD display can
show at one time. Therefore, the cursor can be moved to show other parts of the text. Pressing
the left cursor key (
seen and pressing the right cursor key (
side of the text can be seen.
Some format settings are shown by the triangular and square indicators around the edge of the
display. The default settings (the selected settings when the power is turned on for the very first
time) have been pre-programmed into the machine and represent the most common settings
for labels. However, you can design your own label to have any format that you wish. Detailed
explanations of the formats can be found on pages 47 through 64.
Now, let's enter the text for our first example, the simple door label shown below.
The label in this example was made using the enclosed 1/2" (12-mm)-wide tape.
12

DOOR LABEL EXAMPLE

in the top right-hand corner
) moves the cursor to the left so that the left side of the text can be
Alt A B C D E F G H I J K L
1: _
Caps
) moves the cursor to the right so that the right
Length
Undl/Frm
Wide