Use Of 1.5X Additional Lens (St-086.1); Use Of Illumination; Use With Rechargeable Batteries; Use Of Eye Shields - Optika Italy SLX Serie Manual De Instrucciones

8.6.2 Use of 1.5X additional lens (ST-086.1)

1.5X additional lens has a Working Distance of 47
mm and, in case of very thin specimens (when wor-
king with SLX-2 / SLX-3 models), the microscope
cannot get a proper focus.
In order to overcome this effect, the 1.5X lens is pro-
vided with a transparent spacer ④ that must be pla-
ced on the base plate (Fig. 26).
Once placed the transparent spacer, the user can put
the specimen on the spacer and begin the observa-
tion as usual.
8.7

Use of illumination

1. Turn the transmitted light knob ⑤ in order to turn
ON/OFF or to change the intensity of the transmit-
ted light LED. (Fig. 27)
2. Turn the incident light knob ⑥ in order to turn ON/
OFF or to change the intensity of the incident light
LED.
• It is possible to use both illuminations at the same
time.
8.8

Use with rechargeable batteries

When the power supply is connected to the micro-
scope socket, the "CHG" led ⑦ is lit. (Fig. 28)
RED light: battery with low charge or recharging
GREEN light: battery charged.
• NOTE: when the power supply is disconnected,
the CHG led is always off.
8.9

Use of eye shields

• Use with eyeglasses
Fold rubber eyeshields with both hands. Folded
eyeshields avoid scratching the lenses of eyeglasses.
(Fig. 29)
④
⑦
Page 17
⑥
Fig. 26
⑤
Fig. 27
Fig. 28
Fig. 29