Record Setup - Schedule Setup - Lorex L15LD420 Serie Manual De Instrucciones

Record Setup

Record Setup - Schedule Setup

CHANNEL - Select a single channel to setup the
schedule.
TYPE - Select a recording mode:
Program the recording schedule for the whole year.
Set up the recording mode in different date / time:
: Continuous recording.
: Motion recording when there is motion
detected
: Alarm recording. When there is an
alarm triggered.
: Motion recording + Alarm recording.
ALL: All blocks can be activated or deactivated.
00~24 Hour: To activate or cancel the hours .
SUN~SAT: To activate or cancel the day.
NOTE: If the DVR is set to MOTION RECORDING
and the DVR keeps recording continuously or is not
triggered to record as expected, please check the
sensitivity settings and the motion mask setup in
CONFIGURATION>MOTION SETUP.
If the motion settings are too sensitive, you may
want to lower the sensitivity level and define a
motion detection area for more accuracy. If the
motion is not triggered as expected, you may want
to increase the sensitivity level, clear the motion
mask, or enlarge the detection area.
32