Note
• In the preview mode, no key operation for 2 minute
will close the camera module and go back to
standby mode.
3. Focus on the subject to capture, then press the side camera key
(
). The captured image is automatically saved in My photo
gallery [Menu 6-4]. (Refer to page 83 regarding My photo
gallery.)
4. Before taking a shot, you can set the following options by
pressing the camera setting menu key (
Brightness
➀
➁ ➂ ➃ ➄ ➅ ➆
➄ Shot Mode: Select between Single shot and Multiple shot.
➅ Photo gallery: After taking a shot, you can use this to check
out the captured image.
➆ Exit: Select this to exit from the setting menu.
To move between setting menus, use up/down side keys (
After highlighting a menu, press the camera setting menu key (
to open the menu.
Select the desired value using the up/down side keys (
press the camera setting menu key (
).
➀ Brightness: 6 grades are
available.
➁ White Balance: 5 settings are
available: Auto, Daylight,
Incandescent, Cloudy, and
Flourescent.
➂ Resolution: Select the desired
resolution. Refer to page 81.
➃ Color Mode: 5 settings are
available: Color, Mono, Sepia,
Blue, and Negative.
) to confirm it.
).
)
) and
19