Technical Data - Leuze electronic DDLS 500 Serie Manual De Instrucciones

Technical data

NOTE
Technical data
 Additional specifications and notices for using the device can be found in the
technical description.
Device without heating
Optics
Light source
Laser class
Transmitter (infrared light)
Alignment laser (red light)
Wavelength
Impulse duration
Max. output power (peak)
Data transmission
Electrical equipment
Switching input
Switching output
Operating voltage U
Current consumption
Indicators and operational controls
Individual LEDs
LED strip
Membrane keyboard
Laser diode
1M acc. to IEC 60825-1:2007
1 acc. to IEC 60825-1:2007
Transmitter (IR): 785nm (Frequency F0, Frequency F3)
Alignment laser: 650nm
Transmitter (IR): 8 ... 32ns
Alignment laser: 200ms
Transmitter (IR): 36mW
Alignment laser: 0.39mW
Ethernet
Transmission rate: 100 Mbit/s
Transmission: full duplex
Auto-crossover possible
(please read the user manual or contact the manufacturer for pro-
tocols that are subject to specific real-time requirements)
18 ... 30 V DC
Transmitter not active
0 ... 2 V DC
Transmitter active
+18 ... +30 V DC: received signal level ok
0 ... 2 VDC: intensity warning
18 ... 30 V DC
B
For UL applications: only for use in "class 2" circuits in accor-
dance with NEC.
Approx. 200 mA at 24 V DC (no load at switching output)
Operating status LEDs, operating mode LEDs in the control panel
Status display of the Ethernet connection
Received signal level (SIGNAL QUALITY) LEDs in the control panel
Operating mode selector switch [MODE] in the control panel
852nm (Frequency F4)
EN
21