Before You Start - Siku CONTROL 32 VOGEL & NOOT S 800 Manual Del Usuario

6784_DD_BDAL_Layout 1 25.05.12 10:45 Seite 8
SIKU toy models are manufactured according to
the latest safety requirements. Not suitable for
children aged 36 months or under due to small
parts which may be swallowed. Please keep the
packaging as it contains information provided by
the manufacturer. Subject to colour changes and
technical modifications.
Please read the operating instructions
before use and keep them in a safe
place.

BEFORE YOU START:

Remote control module, tractor vehicle
and charger are
This SIKUCONTROL can be used irrespective of
the selected transmission system. It can be used as
a trailed implement in combination with models
that are controlled by radio and infrared.(Fig.
THE FIRST TIME YOU START
Operation with the remote control
module
You can raise and lower the cultivator elements
of this model using the SIKUCONTROL remote
control module (Fig.
tached to the cultivator, please connect the
model with the storage battery or the data port
of the tractor vehicle by plugging the jack plug
of the data cable into the corresponding data
port on the tractor vehicle (Fig.
ceed by switching the tractor on.
The function of raising and lowering the plough
shares is activated on the remote control module
by moving the joystick. Moving the joystick up will
turn the plough shares clockwise (Fig.
First aid
Here is a list which may help you correct any faults that may occur.
Operation with remote control module and CONTROL tractor
Is the connection cable attached to the tractor
1.
plugged in as far as it will go and engaged?
2. Is the tractor switched on? (flashes twice)
Can the cultivator elements be raised and low-
3.
ered using the hand-held transmitter?
not included!
). Using the data cable at-
- Fig. ). Pro-
). Mov-
Notice: operation is not possible without the remote control module!
ing the joystick down will turn the plough shares
counter-clockwise.(Fig.
will lift the cultivator elements. Moving the joystick
down will lower the cultivator elements.
To prevent the drive transmission from becoming
damaged, the transmission is equipped with a
friction clutch of its own.
Caution – Risk of Death!
Never insert data cables into a socket.
Use only the original charger for charging.
)
The symbols
Data interface for additional equip-
ment
Servo motor
1 Raise/lower unit
This SIKUCONTROL trailed implement
can be used in combination with the
radio-controlled (RC) or the infrared-
controlled (IR) models.
NO
Insert cable
Switch the tractor on now
Contact the service de-
partment
) Moving the joystick up
YES
Step 2.
Step 3.
Cultivator
is in order.
8