Dishwasher Features; Getting Started - Kenmore 587.1233 Serie Guía De Uso Y Cuidada

Dishwasher Features

Your dishwasher cleans by spraying a mixture of hot water and detergent through the
spray arms against soiled surfaces. Each cycle begins by fi lling with water covering the
fi lter area. Water is then pumped through the fi lter and spray arms. Soil particles go
down the drain as the water is pumped out and replaced with clean water. The number
of water fi lls will vary with the cycle being used.
Cup Shelf
Middle Spray Arm
Lower Spray
Arm
Detergent
Dispenser
Vent

GETTING STARTED

1. Load dishwasher (See Preparing and Loading Dishes).
2. Add detergent (See Dishwasher Dispenser & Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Completely close the door so that it is latched shut.
5. Select desired CYCLE (See Cycle Chart). The indicator light above the pad will
glow when selected.
6. Select desired OPTIONS (See Energy Options). The indicator light above the pad
will glow when selected.
7. Run hot water faucet nearest dishwasher until water is hot. Turn water off .
8. To start, press START/CANCEL pad.
Upper Spray Arm
6
Upper Rack
Tub Gasket
Serial Label
(located on
right side of
tub)
Bottom Rack
Silverware
Basket
Glass Trap
Filter
Heating
Element
Rinse Aid
Dispenser