Operation Of The Remote Control Supplied; Use With Onvif Compatible Devices - THOMSON LENS 200 Manual Del Usuario

MOTORISED 1080P INDOOR SECURITY CAMERA PACK
G - OPERATION OF THE REMOTE CONTROL SUPPLIED
Once your camera is configured, you can use the
app or your remote control to arm/disarm the
protection. When the system is armed, app users are
immediately informed if any movement is detected
or if a detector in the installation is triggered, and
if a microSD card is present, a video is recorded.
If the trigger is linked to a detector, the camera
moves in its direction.
H - USE WITH ONVIF COMPATIBLE DEVICES
The ONVIF standard is a global standard allowing
for the interoperability between security and
video surveillance devices. The Thomson Lens 200
camera is compatible with ONVIF devices (IP video
recorders, certain software, network hard drives with
video surveillance functionality, etc.) and allows you
to send and control the orientation of the motors,
the live image and the audio of the camera.
16
EN
Refer to the ONVIF receiver manual that you want
to use to learn how to use the audio-video stream
and control the motors of your Lens 200 camera.
During pairing and/or use, you will be asked for
a username and password specific to the camera.
The user name is admin and the password is by
default the 6-letter PIN code appearing on your
camera (Verification code).
Emergency call button:
immediately triggers the alert
Power indicator light
Partially armed: the opening
detectors are active but the
movement detectors are not
Disarming: the protection is
turned off
Mute function: immediately
shuts down current alerts (but
does not disarm protection)
Fully armed: all detectors are
activated