SOMFY HOME MOTION AXOVIA Passeo 600 Manual Del Usuario página 22

Parametering your PASSEO/AXOVIA
2
3
Push again on the same
button.
>The gate opens, still at low
speed.
4
• Push a last time.
>Both leaves close almost
simultaneously.
At the end of these 4 steps, the PROG light turns off, indicating the end of the gate
displacement memorization procedure.
This cycle must be complete (2 complete, uninterrupted openings/closings). If it is
interrupted, the process is simply postponed and will be taken up again at the next
controlled opening.
• Check the pedestrian mode (leaf covering M1) :
STOP
• Push on the second button.
>Only the covering leaf should open. A
new push on this same button
controls closing the leaf.
Your gate is now ready to operate. Push on the remote control button, your
gate opens automatically. Push again and it closes behind you.
Parametering your PASSEO/AXOVIA
2
J Using precautions in automatic mode.
Your Somfy PASSEO/AXOVIA enables installing your gate in automatic mode in
compliance with the standard NF EN 12 453 with the MANDATORY use of :
• a set of photo-electric cells,
• orange light,
• an area lighting light (500 W max.).
Your SOMFY PASSEO/AXOVIA is provided for connecting these accessories :
STOP
22