Phasak ON-LINE 1000VA Manual Del Usario página 49

Bypass mode
Converter mode
Standby mode
Warning mode
Fault mode
*) When operating in ECO Mode, the efficiency of UPS is higher than that in online mode, but transfer time should not
be 0ms
**) When operating in ConverterMode, the frequency of output should be always 50Hz or 60Hz, but load capacity will
be derated.
When the input voltage is within
bypass voltage range, UPS will
bypass voltage to output.
When input frequency is
within 40Hz to 70Hz, the
UPS can be set at a
constant output frequency,
50Hz or 60Hz.
Utility will charge
batttery and no
voltage until switch on the
UPS.
The UPS is warning
because of overload.
The UPS goes to fault
mode because output is
short.
ON-LINE 1000VA / 2000VA / 3000VA
the
output
​
P H 9210 - PH 9220 - PH 9230 .
48 / 58