Phasak ON-LINE 1000VA Manual Del Usario página 45

BATTERY MODULE FRONT/REAR PANEL
DESCRIPTION
1. Input Connector
Use this input connector to daisy chain the next
Battery module. Remove the connector cover for
access.
2. On-board Replaceable Fuse Cover
Replaceable fuse is accessible from the rear panel. It
must be done by qualified personnel.
3. Output Connector
Use this output Connector to connect the Battery
module to the Power module or to the next Battery
module.
CONNECTION #1 : POWER MODULE WITH
ONE BATTERY MODULE
Step 1: Loosen the two screws to remove the battery
cable retention bracket of the power module.
Step 2: Use the battery cable of the Battery module to
connect the Battery module to the Power
module.
Step 3: Rotate the battery cable retention bracket and
tighten the two screws to fix battery cable.
ON-LINE 1000VA / 2000VA / 3000VA
Battery Model 1000VA
Battery Model 2000-3000VA
Battery bank connection
​
P H 9210 - PH 9220 - PH 9230 .
44 / 58