Phasak ON-LINE 1000VA Manual Del Usario página 44

2.2. UPS Phasak Rear Panel View
POWER MODULE FRONT/REAR PANEL
DESCRIPTION
1. Power On/Off Button
Master ON/OFF for the UPS.
2. Function Buttons
Scroll up, scroll down, select and cancel LCD menu.
3. Multifunction LCD Readout
Indicate status information, settings and events.
4. AC Input Inlet
Connect the AC Power cord to a properly wired and
grounded outlet.
5. Input Circuit Breaker
Provide input overload and fault protection.
6. EPO (Emergency Power Off) Connector
Enable Power-Off in emergency from a remote
location.
7. USB port
This is a connectivity port which allows communication
and control between the UPS and the connected
computer. It is recommended to install the Power
master software on the PC/Server connected with the
USB cord.
8. Serial Port
Serial port provides communication between the UPS
and the computer. The UPS can control the
computer's shutdown during a power outage through
the connection while the computer can monitor the
UPS and alter its various programmable parameters.
9. SNMP/HTTP Network slot
Slot to install the optional SNMP card for remote
network control and monitoring.
10. Battery Backup & Surge Protected Outlets
Provide battery backup and surge protection. They
ensure power is provided to connected equipment
over a period of time during a power failure.
11. Extended Runtime Battery Module Connector
Connect to additional external battery modules.
12. Output Terminal Block
Connect to your equipment.
ON-LINE 1000VA / 2000VA / 3000VA
UPS 1000VA
UPS 2000VA
UPS 3000VA
​
P H 9210 - PH 9220 - PH 9230 .
43 / 58