Thinning Out Hair - Grundig MT 8240 Manual De Instrucciones

OPERATION ______________________________
Thinning out hair
1
If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert attachment
7 (width 30 mm), put comb attachment
4
(width 2 mm) carefully at the top
and press down until it clicks into place.
C
3
Press the button to switch on the
appliance and start thinning out your
hair.
C
4
Press the button to switch off the
appliance after use.
Skin close cut of body hair
Please use the body hair trimming
1
head .
1 If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert attachment
top and press down until it clicks into
place.
C
3
Press the button to switch on the
appliance and start trimming your
body hair.
Notes
Do not apply strong pressure when
7
cutting, as this may cause skin injury.
26 ENGLISH
A
(width 38 mm) or
1
carefully at the
Clean the body hair trimming head
7
1
with the cleaning brush supplied.
4
Press the
B
appliance after use.
Trimming body hair to a
certain length
Please use the body hair trimming head
1
and attachment comb
1
If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert attachment
top and press down until it clicks into
place.
3 Push the attachment comb
ly and firmly onto the rounded rear
half of the cutting head from above
and let it click into place.
B
Note
To adjust the attachment comb
7
attach it in one of the three side rails
of the body hair trimming head
The nearest rail to the trimming
blades will adjust the attachment to
9 mm, the middle rail to 5 mm and
the outer rail to 2 mm.
4
Press the
appliance and start trimming your
body hair.
5
Press the
appliance after use.
C
button to switch off the
2
.
1
carefully at the
2
C
button to switch on the
C
button to switch off the
B
careful-
2
,
1
.