Tabla de contenido
Idiomas disponibles
Idiomas disponibles
On/Off switch 14 in position
"
"
Press 1 time
Laser
Working without Automatic Leveling
(see figure F1)
Press 2 times
Laser
When automatic leveling is switched off, you
can hold the measuring tool freely in your
Press 3 times
Laser
hand or place it on an inclined surface. The
laser beams no longer necessarily run vertical
Press 4 times
to each other.
Laser
Working without Automatic Levelling
On/Off switch 14 in position
"
"
Press 1 time
Laser
Press 2 times
Laser
Press 3 times
Laser
Remote control via
the "Leveling Remote App"
The laser tool is equipped with a Bluetooth
module which uses radio technology to
enable remote control via a smartphone with a
Bluetooth
®
interface.
The "Leveling Remote App" application
(app) is needed to use this function. You
can download this in the app store for your
terminal device (Apple App Store, Google Play
Store).
For information on the necessary system
requirements for a Bluetooth
please refer to the Bosch website at www.
bosch-pt.com
When remote controlling by means of
Bluetooth
®
, time lags may occur between
mobile terminal/device and laser tool as a
result of poor reception conditions.
Switching On Bluetooth
Do not turn on laser
r e m o t e l y u s i n g t h e
Bosch app without line of sight to the laser
tool. The sudden bright laser beam may
increase the risk of personal injury or property
damage.
2610050715 5-19 GCL100-80CCG.indd 17
Cross-line operation
–
–
–
–
Cross-line operation
Horizontal line
Vertical line
operation
operation
Cross-line operation
–
–
Cross-line operation
®
®
connection,
®
-17-
–
For work without automatic leveling, slide the
On/Off switch 14 to position "On
–
The laser lines will flash slowly.
If you activate automatic leveling (On/Off
switch 14 to position "On "), the measuring
tool will switch to cross-line operation with
point operation.
Point
Indicator 5 for working
operation
without automatic levelling
–
–
–
–
Ensure there are no bystanders in the direct
path of the laser beam before turning on the
laser remotely.
To switch on Bluetooth
control, press the Bluetooth
that the Bluetooth
®
interface is activated on
your mobile terminal/device.
After starting the Bosch application, the
connection between the mobile terminal/
device and the laser tool is established. When
several active laser tools are found, select
the appropriate laser tool. When only one
active laser tool is found, the connection is
automatically established.
The connection is established as soon as the
Bluetooth
®
indicator 2 lights up.
The B l u eto ot h
®
connection may be
interrupted if there is too much distance or
there are obstacles between laser tool and
mobile terminal/device and if there are any
electromagnetic interference sources. In this
case, the Bluetooth
®
indicator flashes.
Switching Off Bluetooth
To switch off Bluetooth
control, press the Bluetooth
switch off the laser tool.
B1
C1
".
D1
E1
B1
Figure
red
F1
red
red
red
F1
®
for the remote
®
-button 3. Ensure
®
®
for the remote
®
-button 3 or
6/6/19 7:06 AM
Tabla de contenido
