General Operation - Trevi HCV 10D35 DAB Manual De Usuario Y La Connexion

Ocultar thumbs

Contenido

página de 51

/ 51
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

ENGLISH

After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket.

NOTE: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.

STAND-BY FUNCTION

1. To switch on the appliance, press the

remote control;

- The appliance will start on the last selected function before switching off.

2. To switch off the appliance, hold down the

button (53) on the remote control.

Note: This unit is designed to enter STANDBY mode automatically after 20 MINUTES of inactivity. Press the

(1) on the main unit, or press the

MUTE

1. To temporarily silence playback of any mode press the MUTE button (39) on the remote control;

2. Press once more to resume the audio output.

VOLUME CONTROLS

1. Press the VOL+ button (44) on the remote control or on the main unit (9) to increase the volume level;

2. Press the VOL- button (42) on the remote control or on the main unit (8) to decrease the volume level.

EQ MODES AND X-BASS CONTROL

You can change the EQ levels to adapt to the type of audio you are listening to.

1. Press the EQ button (34) repeatedly to cycle through the available options of: FLAT, ROCK,C LASSIC,POP & JAZZ.

When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS"

indicator will appear. To cancel the extra bass mode, press the X-BASS button on the remote control.

BASS AND TREBLE CONTROL

1. Press the TREBLE button (3) to select "Treble";

2. Within 5 seconds, press the VOL + (44) or VOL - (42) button to adjust the treble;

3. Press the TREBLE button (3) to select "Bass";

4. Within 5 seconds, press the VOL + (44) or VOL - (42) button to adjust the bass.

SLEEP FUNCTION

Should you wish to set a timer for the unit to enter standby mode after a period of time follow the steps below:

1. Ensure the unit is ON and not in STANDBY;

2. Press the SLEEP button (36 ) repeatedly to cycle through the preset timers from 90 minutes to 10 minutes then OFF;

3. When you have selected the required timer duration, after 1 second of inactivity the setting will be stored and the countdown

will begin.

1. Switch on the appliance and press the

on the display, or press the FM/DAB button (18) on the remote control;

- The first time the radio is turned on it will automatically scan and store all available DAB stations.

2. If you want to repeat the scan operation of the available DAB stations, press the SCAN (49) button, the message will appear

Scanning...

3. Press

(6) and

(7) button on the unit, or TUNE

the various tuned DAB stations. Press the ENTER button (4) on the unit or the ENTER (24) on the remote control on the desired

DAB station to start playback;

4. Press the INFO button (37) several times to display information on the station received.

DAB/DAB

1. Press the MENU button (21) to access the DAB menu;

2. Press the TUNE

(23) and TUNE

3. Press the ENTER button (24) to select the displayed menu item:

Full scan: allows you to scan the entire DAB/DAB+ band and store the stations found.