Usb Operation - Trevi HCV 10D35 DAB Manual De Usuario Y La Connexion

ENGLISH
PLAY MODE
1. Switch on the appliance and press the
on the display, or press the CD button (20) on the remote control;
2. Press the OPEN/CLOSE button (52) on the remote control, load a disc on the drawer (label facing upwards) and press the OPEN
CLOSE button once more to close;
3. After a brief period the unit will automatically read the disc and begin playback from track 01;
/
 
4. Press button (46) to PAUSE playback. From the PAUSE position pres again
5. Press , Stop button (45) on remote control during playback to stop the disc at it's current position.
SKIPPING TRACKS
9
1. Press button (6) or
previous track on a disc;
2. Press and hold 9 button (6) or
or fast rewind the current track.
REPEAT FUNCTION
1. Press the REPEAT button (33) on the remote control, "REP . ONE" will appear on the display to repeat the current track;
2. Press the REPEAT button (33) again, the display will show "REP . ALL" to repeat the entire disc;
3. To cancel the repeat function, press the REPEAT button (33) again, the word "DISC CD" will appear on the display.
RANDOM FUNCTION
1. During CD playback pressing the RANDOM button (40) on the remote will playback all tracks on the current disc in a random
order. You will see 'RANDOM' appear on the display to indicate this function is active;
2. Press the RANDOM button once more to cancel the function. The 'RANDOM' icon will disapear.
PROGRAMME SETTING (REMOTE CONTROL ONLY)
User can program up to 30 tracks in CD mode or 99 tracks in MP3 in any desired order. Programme mode is activated while in
STOP mode.
1. Press the , STOP button (46) to stop playback (if required);
2. Press the MEMORY button (35) on the remote control You will see 'P01' on the display to indicate the program function is active;
3. Use the NUMERIC buttons (34) to enter the track number you want to play in slot P01;
4. Press the MEMORY button (35) once more to proceed to slot P02. When 'P02' appears on the display you can repeat step 3
and enter the track number of slot P02;
5. Repeat steps 4-5 until you have programmed all tracks you want in the sequence;
6. To begin playback of the programmed sequence press the
7. To cancel playback press the
INTRO FUNCTION
1. Press the INTRO button (41), you will see 'INTRO' appear on the display. The first 15 seconds of each track on the current disc
will now play;
2. Press the INTRO button (41) again to cancel. You will see 'INTRO' disappear on the display.
PLAY AUDIO FROM USB SOURCE
1. Press the USB button (19) on the remote control or
2. Insert a compatible USB flash drive into the USB port (5) on the front of the unit. The unit will scan the USB flash drive and display
the total number of tracks found on the drive. Playback of track 01 will begin automatically.
Note: The player may not support some devices equipped with a USB socket, this is due to the incompatibility of some processors.
/
 
3. Press button (46) on remote control
/
 
4. Press again button (46) on remote control to resume playback;
5. Press , STOP button (45)
6. Refer to "CD Operation" for all functions control.
20
/SOURCE button (1) on the main unit several times, until the indication CD appears
: 9
button (7) on unit or
: button (7) on unit or
, STOP button (45).
to activate PAUSE, the time indication on the display will start to
to Stop playback;
CD OPERATION
:
button (27) or button (28) on remote control to skip to the next or
9 button (27) or :
/
 
button (46);

USB OPERATION

/SOURCE button (1) main unit repeatedly until you reach the USB
HCV 10D35 DAB
/
 
button (46) button to resume playback;
button (28) on remote control to fast forward
mode;
flash;