Tabla de contenido
Idiomas disponibles
Idiomas disponibles
a
b/c Units of measure: °; %; IN/FT
d
e
f
g
Use alkaline (4 x AA) batteries to operate the
digital level.
ing on the battery lid. Incorrect battery polar-
ity may cause fire or personal injury.
To open the battery lid 3, press on the latch 4
and fold the battery lid up. Insert the batteries.
Battery Indicator
The battery indicator f always displays the cur-
rent battery status:
Always replace all batteries at the same time.
Do not use different brands or types of batter-
ies together.
Remove the batteries from the digital level
when not using it for longer periods. When
storing for longer periods, the batteries can
corrode and self-discharge.
8
2610039976 GIM60 GIM120.indd 8
Display elements
Alignment arrows
"H" indicator for "HOLD" memory value
Reading
Battery indicator
Indicator for audio signal
Assembly
Inserting/Replacing the Batteries
The battery is over 90 % full
The battery is between 60 % and 90 %
full
The battery is between 30 % and 60 %
full
The battery is between 10 % and 30 %
full
The empty battery indicator flashes. The
battery level is under 10 %. Once the bat-
tery indicator begins flashing, you can
measure for approximately another 15-
20 minutes until the tool shuts down.
Ensure polarity of each
battery matches the mark-
8/24/15 10:42 AM
Tabla de contenido
