Rena Ware AQUA NANO HD CTU-300 Uso Y Mantenimiento página 8

4. Place the Inlet Assembly on top of the Pre-Filter Cartridge; rotate the Inlet
Assembly approximately 1/8 turn clockwise so that the tubing is in line with the
Wand's stem.
5. Using padded or locking pliers, remove the existing aerator from your faucet.
6. Remove the protective wrapping from the Diverter Valve assembly and thread
the Diverter Valve onto the faucet; "hand–tighten" only. Do not over tighten as
it could damage the threads. If the diverter valve is not compatible with your
faucet, try the adapters included, if they don't work, contact Rena Ware Customer
Service for assistance.
8