Rena Ware AQUA NANO HD CTU-300 Uso Y Mantenimiento página 14

5. Invert the Pre-Filter cartridge and place the Back-Flow Adaptor on the outlet nipple
of the Pre-Filter.
6. Over the sink insert the outlet nipple of the Inlet Assembly into the other end of
the Back-Flush Adapter and keep pressure on it.
7. Have a second person switch the diverter valve to the filtering position and turn on
the water. There will be a small amount of back pressure forcing the Inlet Assembly
out of the Back-Flush Adapter so you must hold the Inlet Assembly, Back-Flush
Adapter, and Pre-Filter together to keep pressure on it and keep them from coming
apart.
8. Allow the water to run for 5 minutes, shake the cartridge and tap it against the sink
until the flow rate has increased.
14