QSC CXD Serie Manual Del Usuario página 9

página de 150

/ 150
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Menu Tree

Presets

Preset Recall

Preset Save

Preset Wizard

*For QSC Line Arrays only

About Presets

The CXD amplifiers are preset driven. In order to get the most out of the amplifiers, an understanding of how presets work is essential. A Preset, in the

context of the CXD amplifiers, is a combination of amplifier configuration (inputs and outputs), DSP and loudspeaker assignments. When a preset is

recalled it can change the output routing and wiring and/or any of the DSP settings.

The CXD amplifiers come with 20 unchangeable factory presets, and 50 user-defined presets. The factory presets are designed to be starting points

for creating the presets you need for your particular installation. Factory presets F1: thru F9: have no DSP or loudspeaker assignments, only output

configurations. Factory presets F10: thru F20: include basic settings along with the output configurations.

Creating User-defined Presets

A preset can be created in two ways, the first is to modify an existing preset, then save this as a new preset. The second is to use the Preset Wizard to

create a Preset from scratch.

Save As a New Preset

After selecting a starting preset, navigate through the Input and Output menus to select and modify the parameters needed for your system. After

modifying the parameters for each channel, return to the Preset menu and save your work. If you started with a user-defined preset, you can update

the preset you started with using the SAVE function or, you can use the SAVE AS function.

Preset izard

The Preset Wizard simplifies the preset creation process, and allows you to create a preset from the ground up. The Preset Wizard provides a

mechanism for you to select the desired power and load. Based on these selections, the best amplifier configuration is selected and you are then

allowed to select and assign loudspeakers to each output.

NOTE!: By default, all 50 of the user-defined presets are configured the same as factory preset F1. Either method described above

"overwrites" some existing preset. The main difference is the SAVE function overwrites only the preset number you started with, and the

SAVE AS function allows you to save to a different user preset number and change the name.