Grundig RCD 1445 USB Manual Del Usuario página 25

MP3 MODE
Creating a track memory
You can store and then play back up to 20 titles from
various albums on the disc or USB memory stick in a set
order. A track may be stored more than once. Program
is only possible in the stop position.
Selecting and storing files
1 Press »PROG/MEM« to call up the function.
– D isplay: »000« for the first preset position, »MEM«
flashes.
2 Select the album by pressing »ALBUM MEMORY
DOWN« or »ALBUM MEMORY
3 Select the file you want by pressing »DOWN
»UP «.
4 Press »PROG/MEM« to save the file.
– D isplay: »000« for the second preset position,
»MEM« flashes.
5 To save more files, repeat steps 2 to 4.
Playing back titles in random order
(Random)
1 In stop mode, keep pressing »MODE« until »RND«
appears in the display.
e
2 Press » II« to start random playback.
– A ll tracks on the CD are played back once in ran-
dom order.
3 To terminate the function, press »MODE« again.
Playing back a track memory
1 Start the track memory by pressing »
– P layback begins with the first programmed file.
2 Press »■ MONO/ST« to end playback.
3 To play the track memory again, press
»PROG/MEM« and afterwards »
Changing the file selection
1 In stop mode, keep pressing »PROG/MEM« until
the number of the file you want to replace appears
in the display.
2 Select the number of the new file or track by pressing
»DOWN « or »UP
3 Press »PROG/MEM« to save the new file or track.
_____________________________________________________________
UP«.
« or
e
II«.
e
II«.
«.
Adding files
1 In stop mode, keep pressing »PROG/MEM« until
the file shown in the display is zero.
2 Select the number of the new file by pressing
»DOWN « or »UP
3 Press »PROG/MEM« to save the file.
Deleting the track memory
The device must be in the stop position.
1 Press »OPEN/CLOSE« to open the CD compart-
ment;
or
press »■ MONO/ST.« while programming.
«.
25
ENGLISH