Blowing Function; Interrupting Operation; Finish Operation; Maintenance And Care - Kärcher MV 5 Manual De Instrucciones

Illustration
-Switch the appliance on (move the ro-
tary switch to the left to position
MAX) and start working.
Note: As soon as the electric tool is
switched on, the suction turbine starts
with a 0.5 second delay. If the electric
tool is switched off, the suction turbine
continues to run for approx. 5 seconds
in order to vacuum up the remaining
dirt in the suction hose.
Integrated filter cleaning
system
The filter cleaning system is intended
for vacuuming up large volumes of fine
dust without an inserted filter bag.
Note: Thanks to the filter cleaning sys-
tem the soiled flat pleated filter can be
cleaned at the push of the button and
the suction performance can be in-
creased again.
Illustration
Place the handle of the suction

hose in the accessory compartment
on the appliance head. Push the fil-
ter cleaning button 3 x while the ap-
pliance is switched on, wait 4 sec-
onds between the individual opera-
tions.
Note: After operating the filter cleaning
button several times, check the con-
tainer for its filling volume. Otherwise,
the dirt might escape when the con-
tainer is opened.

Blowing function

Cleaning hard to reach locations or,
where vacuuming is not possible, like
leaves from a gravel bed.
Illustration
Connect the suction hose to the

blower connection, this will activate
the blower function.

Interrupting operation

Illustration
Turn off the appliance.

Illustration
Hook the floor nozzle into the park-

ing position.

Finish operation

Turn off the appliance and discon-

nect the mains plug.
Empty the container
Illustration
Remove the appliance head and

empty the reservoir filled with wet or
dry dirt.
For appliances with drain screw:
Empty the dry dirt over the contain-
er. Use the drain screw to empty liq-
uids.
Storing the appliance
Illustration
Stow away the mains cable and ac-

cessory at the machine. Store the
appliance in a dry room.

Maintenance and care

DANGER
Turn off the appliance and re-
move the mains plug prior to any
care and maintenance work.
Repair works may only be per-
formed by the authorised cus-
tomer service.
WARNING
Do not use abrasives, glass or
universal cleaners! Never im-
merse the appliance in water.
Clean the appliance and accessory

parts made of plastic with a com-
mercial plastic cleaner.
– 11
EN 21