Decommissioning And Storage - Far Tools TF 1000 Traduccion Del Manual De Instrucciones Originale

EN
MANEUVER
Manipulation of the winch is very simple and is done in
manoeuvring the telescopic handle after a back and forth
movement whose amplitude is variable according to the
convenience of the operator.
The movements of the market front and rear levers are
double effect, load moving every race of lever in either
direction of movement of the handle.

DECOMMISSIONING AND STORAGE

Store the appliance and the cable in a dry place, protected
from the weather. The cable must be stored on the drum
and completely out of the unit. Before you wrap on his
grinder, it is recommended to inspect it and clean it with
a brush to grease.
1. This winch has a capacity of 900 kg. In practice, you can use it to:
a. Pull up to 900 kg initially stopped, on flat ground.
b. Move a maximum 4.5 t craft on the water.
c. Maintain moving a vehicle of maximum 5.4 t.
2. The ability to traction decreases depending on the slope. For example, the ability to run password 5.4 t on flat ground to 0.5 t on
upward slope of 45 °.
Weight
(Tons)
2730
2275
1820
1365
910
455
182013-Manual-B.indd 20
MAINTENANCE
1. Lubricate the cable occasionally with light oil.
2. Graissez the gears every 6 months. To do this, remove the
clutch button and separate the left and right housings. Use
any good grade waterproof grease.
PULLING CAPACITY
10° 20°
Degrees of tilt
EN
30° 40° 45°
12/11/2019 14:06