Safety Information; Declaration Of Incorporation Of Partly Completed Machinery; Safety Warnings - Vimar Elvox ESM1 Manual Para El Conexionado Y El Uso

ACTO
Important - safety information
• Installation must be performed by professionally qualified personnel in observance of current national and European legislation. After removing the
packaging check the condition of the device. If in doubt, consult a qualified technician.
• Packaging materials (carton, plastic bags, staples, polystyrene, etc.) must be disposed of in suitable containers and must not be dispersed into the
environment. Above all they must be kept out of the reach of children. The installation, electrical connections and settings must be executed in accordance
with sound engineering practice. Make sure that the data on the data plate conform with the mains electrical supply data and make certain that the section
of the connection cables is suitable for the loads applied. Do not install the product in environments where there is a risk of explosion or which are disturbed
by electromagnetic fields. The presence of flammable gases or fumes constitutes a serious hazard. The products used must not contain asbestos. Oils
containing polychlorinated biphenyl must not be used in the products. Equip the mains supply with a suitable overvoltage protection device, a switch/
disconnector and/or differential for the product and in conformity with the standards in force. Clearly indicate with an appropriate sign on the gate, door,
window or barrier that they are remotely operated.
• ELVOX s.p.a. denies all liability for damage incurred when devices and/or components are used that are incompatible in terms of product integrity, safety
and operation. This equipment must be used exclusively as specified in design; any other use is to be considered improper and therefore hazardous. The
product is not designed for use by persons (including children) with impaired physical, sensory or mental capacities, or by anyone lacking the necessary
experience or knowledge, unless supervised or instructed in its operation by an individual responsible for their safety. Always disconnect the equipment
from the power supply by means of the main switch or by removing the plug before performing maintenance or cleaning. Use exclusively genuine spare
parts for repairs and replacements. Before beginning the installation process, make sure the structure to be automated is in good condition, and that it
opens and closes correctly. The installer must provide all information regarding operation, maintenance and use of the single parts and the system as a
whole.
Declaration of incorporation of partly completed machinery (Directive 2006/42/EC) Elvox S.p.A.
Address: Via Pontarola 14/A – 35011 Campodarsego (PD) - ITALY
We declare that: The 12 V dc sliding article is built to be incorporated in a machine or to be assembled with other machinery in order to build a machine in
accordance with Directive 2006/42/ED in conformity with the essential requirements of safety of the following EU directives
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility Directive
In addition, we declare that it is not allowed to commission the machinery until the machine in which it is to be incorporated or of which it will become a
component has been identified and has been declared as conforming to the conditions of Directive 2006/42/EC and subsequent amendments.
Campodarsego, 13/02/2013

Safety Warnings

1. Do not enter the automatic gate system's range of movement while it is in motion; wait until all movement has stopped.
2. Only activate the automatic gate system when it is completely visible and free from any obstacles.
3. Do not allow children or animals to play or sit near the range of movement. Do not allow children to play with the opening controls, or with the radio control.
4. Do not attempt to counteract automatic gate system movement as this result in a dangerous situation.
5. Do not touch the equipment with wet hands and/or feet.
2002/96/EC Directive (WEEE).
The crossed-out dustbin symbol on the equipment indicates that the product, at the end of its useful working life, must be disposed of separately from normal
household waste, and as such must be taken to a waste separation and recycling centre equipped to deal with electric and electronic equipment or sent back
to the dealer when new replacement equipment is purchased. The user is responsible for ensuring the equipment is disposed of via the correct channels when
it is no longer in working order. Suitable separated waste collection for subsequent recycling, processing and environmentally conscious disposal of the old
appliance helps to prevent negative impact on the environment and human health while encouraging recycling of the materials used to build the product. For
more detailed information regarding the available waste collection systems, contact your local waste disposal service or the shop from which the equipment
was purchased.
Risks associated with substances considered hazardous (WEEE).
According to the new WEEE Directive, substances which for some time have been widely used in electrical and electronic equipment are considered hazardous
to human health and the environment. Suitable separated waste collection for subsequent recycling, processing and environmentally conscious disposal of the
old appliance helps to prevent negative impact on the environment and human health while encouraging recycling of the materials used to build the product.
The product complies with the European Directive 2004/108/EC and subsequent amendments.
Read it carefully as it provides important guidelines regarding installation, use and maintenance. Always store this module carefully and transfer it to any
subsequent users of the system. Incorrect installation or improper use of the product may constitute a serious hazard.
EN
11