Use; Caffè Latte Preparation - Beem M300-F Manual De Instrucciones

NOTE: The appliance has a touch key (see photo) that can only be switched on
and that switches off automatically. Merely touching the
touch key is sufficient to switch the appliance on, even
if it is not yet plugged into the mains. When you use the
coffee-maker for the first time, it is therefore possible
that it is already switched on (touch key is illuminated).
So prepare everything first (cleaning the appliance,
filling it with water and coffee) before placing the
appliance on the base station.
However if the coffee-maker has already heated up, it
must be allowed to cool down completely before you
use it. Otherwise the brewing process may be ended
prematurely or may not start at all.
6

Use

Hints and tips:
It is best to use dark, freshly roasted coffee varieties to make espresso.
To make espresso the coffee should be finely ground until it is as fine as salt or sand.
If the coffee is too coarse, on the other hand, it does not properly release its flavour.
Mocha powder is ground generally very finely, the coffee funnel (12 or 13) may only
be filled loosely with the mocha powder.
Always use fresh cold water. Do not let the water stagnate in the tank.
Soft water is ideal for espresso. Hard or salty water will severely impair the flavour.
With the Lattespresso machine you can prepare two different quantities of coffee: for
5-7 cups use the large coffee funnel (12), for 2-4 cups use the small coffee funnel (13)
6.1 Caffè latte preparation
Fig. 1 Remove the jug (8) from the water tank (15) by screwing it anticlockwise.
Fig. 2 Screw the caffè latte valve (2) onto the riser tube (4) in the jug. Press the reset
button (1).
NOTE: Pressing the reset button (1) is actually only necessary if remnants of
coffee powder or lime scale have settled in the caffè latte valve (2) from making
caffè latte. Since it cannot be seen whether the reset button has to be pressed
or not, we recommend doing this before each time you make caffè latte simply
to be on the safe side.
Fig. 3 Remove the coffee funnel (12/13) from the water tank (15).
Fig. 4 Fill the water tank (15) to mark 3 or mark 6 (max.) with clean cold tap water.
NOTE: Never put more water than indicated into the tank when making caffè
latte. Since there is already an amount of milk in the container the caffè latte
will overflow.
BEEM – Elements of Lifestyle 20 / 68