How To Assemble Your Ceiling Fan - Fanimation The Celano Manual Del Propietário

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

1. Dis-assemble the Upper Housing Cover by loosening

three screws (Fig 1a) and carefully twist-n-lift off the Cover

(Fig 1b).

2. Attach blades to the motor hub using the provided

washer head screws and fiber washers. Make sure the

screws securing the blades to the motor hub are tight and

are properly seated. Do not overtighten.

(Figures 2a, 2b)

3. Re-assemble the Upper Housing Cover by securing the

Cover as shown (Figure 3) and do not over-tighten the

screws.

4. Remove the Hanger Ball by loosening the setscrew

in the Hanger Ball until the ball falls freely down the

Downrod. (Figure 4) Remove the Pin from the Downrod,

then remove the Hanger Ball. Retain the Pin and Hanger

Ball for reinstallation in Step 6.

5. The fan comes with blue, black, and white 80˝ wires.

Separate and untwist the three wires. Route the wires and

support cable through the Downrod.

NOTE: You will be using either the 6˝ or the optional

downrod purchased separately.