Fanimation The Celano Manual Del Propietário página 10

Installing the Light Kit Assembly (cont'd)
4. Securely attach Downlight Socket Plate Assembly to the
Adapter Plate by tightening three screws provided with the
fan. (Figure 4)
INSTALLATION NOTE
If You Are NOT Installing The Light Kit, Go To Next
Page Under "Installing The Lower Housing Assembly"
Section.
5. Install one Minican Bulb (included - 100 watts max)
in the socket on the Downlight Socket Plate Assembly.
(Figure 5)
CAUTION
To reduce the risk of fire, use 100-watt max. type
T4-minican JD E11 tungsten halogen bulb. Turn off the
wall switch and allow the bulb to cool for 10 minutes
before relamping.
Bulb is pressurized and may shatter. DO NOT TOUCH
BULB WITH BARE HANDS. Fingerprints may result in
shorter bulb life. Remove fingerprints with alcohol prior
to use.
6. Carefully install the Glass/Frame Light Kit Assembly into
the Adapters' slots. (Figure 6)
7. Securely attach the Glass/Frame Light Kit Assembly by
twisting onto the Adapter plate. Don't overtighten.
(Figure 7)
8. You have now completed the assembly of your ceiling
fan. Restore electrical power.
10
Figure 4
Figure 5
Figure 6
Figure 7