Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. ATTACH MOWER
SIDE SUSPENSION
ARMS (A) TO CHASSIS
- Position hole
in arm over pin (B) on outside
of tractor
chassis and secure with retainer spring.
4. Repeat
on opposite
side of tractor.
5. ATTACH
REAR
LIFT LINKS
(C) - Lift
rear corner of mower and position
slot
in link assembly
over
pin (D) on rear
mower bracket
and secure with washer
and retainer spring.
7. Insert end of link (E) into hole in front
mower
bracket
(H) and secure
with
washer
and retainer spnng (J).
8. Hook end of clutch cable spring (Q) into
hole in idler arm (R).
9. Push clutch cable houstng guide (P) into
bracket, slide collar (L) onto guide and
secure with retainer spnng (K).
t0. install belt onto engine pulley (M) and belt
keepers (G).
6. ATTACH
FRONT
LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly
through
front
hole in tractor
front suspension
bracket (F).
IMPORTANT:
Check belt for proper routing
tn all mower pulley grooves.
11. Raise attachment
lift lever to htghest
position.
12. If necessary, adjus_ gauge wheels before
operating
mower as shown in the Opera-
tion section of this manual.
03042[ex
2O
Tabla de contenido
