Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MUFFLER
Inspect
and replace
corroded
muffler
and
spark arrester (if equipped)
as it could create
a fire hazard and/or damage.
SPARK
PLUG(S)
Replace
spark plug(s)
at the beginning
of
each
mowing
season
or after every
100
hours of operation,
whichever
occurs
first.
Spark plug type and gap setting are shown
in "PRODUCT
SPECIFICATIONS"
section
of this manual.
IN-LINE
FUEL FILTER
The fuel filter should be replaced once each
season,
If fuel filter becomes
clogged,
ob-
structing fuel flow to carburetor,
replacement
is required.
1. With engine cool, remove filter and plug
fuel line sections.
2. Place newfuel filter in position in fuel line
with arrow pointing
towards
carburetor.
3. Ensure there are no fuel line leaks and
clamps are properly
positioned.
4. Immediatelywipe
up any spilled gasohne.
amp
CLEANING
•
Clean engine,
battery, seat, finish, etc,
of all foreign matter.
•
Clean debrisfromsteering
plate. Debris
can restrictclutch!brake
pedal shaft move-
ment, causing belt slip and loss of drive.
/i, CAUTION:
Avoid
all pinch points and
movable
parts
_-
_.
Clutch/brake pedal
4/
."
f,' Clean
_o_+
I/ top side _
._//-."
Steerlngplate_,.-;"
"_
....
Steering System, Dash,
Fender and Mower Not Shown
/i""
¢
CAUTION: I
Pinch I
41_ Points I
•
Keep finished
surfaces
and wheels free
of all gasohne, oil, etc.
•
P rotect painted surfaces with automotive
type wax.
We do not recommend
using a garden hose
or pressure
washer
to clean your
tractor
unless
the engine
and transmission
are
covered to keep water out. Water in engine
or transmission
will shorten the useful life of
your tractor.
Use compressed
air or a leaf
blower
to remove
grass, leaves
and trash
from tractor and mower.
DECK WASHOUT
PORT
Your tractor's deck is equipped with a wash-
out port o n its surface as part of its deck wash
system. It should be utilized after each use.
1.
Drive the tractor to a level, clear spot
on your fawn, near enough
to a water
spigot for your garden hose to reach.
IMPORTANT:
Make
certain
the tractor's
discharge chute is directed AWAY from your
house, garage,
parked cars, etc. Remove
bagger chute or mulch cover if attached.
2.
Make surethe attachment
clutch control
is in the "DISENGAGED"
position, set
the parking brake, and stop the engine.
3.
Thread the nozzle adapter
(packaged
with your tractor's
Operator's
Manual)
onto the end of your garden hose.
4.
Pull back the lock collar of the nozzle
adapter and push the adapter onto the
deck washout port at the left end of the
mower deck. Release the lock collar to
lock the adapter on the nozzle.
Hose_
/
_._._
WashoutPort
4-1
Nozzlo/_
"i /
r_
_1
IMPORTANT:
Tug hose ensuring
connec-
tion is secure.
5.
Turn the water on.
6.
While sitting in the operator's position on
the tractor, re-start the engine and place
thethrottle
lever in the Fast",_"
position.
IMPORTANT:
Recheck
the area
making
certain the area is clear.
7,
Move the tractor's
attachment
clutch
control
to the "ENGAGED"
position.
Remain
in the operator's
position
with the cutting deck engaged
until the
deck is cleaned.
8.
Move the tractor's
attachment
clutch
control
to the "DISENGAGED"
posi-
tion. Turn the ignition key to the STOP
position to turn the tractor's engine off.
Turn the water off.
9.
Pull back the lock collar of the nozzle
adapter to disconnect
the adapter from
the nozzle washout
port.
10. Move the tractor to a dry area, prefer-
ably a concrete
or paved area. Place
the attachment
clutch
control
_n the
"ENGAGED"
position to remove excess
water and to help dry before putting the
_ll
tractor away.
WARNING:
A broken or missing washout
fitting could expose you or others to thrown
objects from contact with the blade.
•
Replace broken or missing washout fitting
immediately, prior to using mower again.
* Plug any holes in mower with bolts and
Iockn uts.
18
Tabla de contenido
