Idiomas disponibles
Idiomas disponibles
INTERCOM CALL-OUTSIDE
FACTORY DEFAULT
FW VERSION
ESC
On the page that opens (showing the item RESTORE), keep the
for 3 seconds. The words DELETE CONFIGURATION will appear. Confirm the operation
with ENTER. The video entryphone will emit a long, 2-second beep while it is resetting
the factory configuration.
operation; you will lose all the customisations you have made.
In the unlikely case that the video entryphone becomes blocked, or an anomaly arises
during operation, you can restart the device without disconnecting the power supply.
1
2
18/01/2010
ENTER
! The resetting of the factory configuration is an irreversible
To do this, remove the plate that protects the video entryphone,
then press the flush-mounted button on the left with the aid of a
pencil or pen (as shown in the figure).
After resetting, wait a minute to allow the video entryphone to
complete the initialisation operations.
Check the video entryphone is working correctly, then replace
its plate.
142
On the settings page, use
12:00
the
to select FACTORY DEFAULT,
then confirm the selection with
ENTER.
and
keys
key pressed
