Idiomas disponibles
Idiomas disponibles
Via the video entryphone, you can command the outputs of the relay units
(GW 18 381). From these outputs it is possible to activate auxiliary devices such as
lights, secondary electro-locks, and electric gates.
There are two ways to activate an auxiliary service with the relay unit (GW 18 381): using the
menu or the up/down arrows button keys. To configure the latter method, refer to the paragraph
Secondary function configuration of the up/down arrow navigation button keys.
Using the up/down arrow button keys, simply press the button key (with the screen on and not
in the menu) once to send the command to the relay module. A maximum of two outputs can be
activated with this method.
Use the menu to carry out the following:
INTERCOM CALL
CAMERA VIEW
VIDEO MAIL
PRIVACY
CALL TRANSFER
AUXILIARY SERVICES
BABY MONITOR FUNCTION
HANDS FREE FUNCTION
BUSINESS OFFICE FUNCTION
ESC
REMOTE RELAY INTERFACE 1
REMOTE RELAY INTERFACE 2
ESC
18/01/2010
12:00
ENTER
18/01/2010
12:00
ENTER
115
On the main menu page, use
the
and
to select AUXILIARY SERVICES,
then confirm the selection with
ENTER.
On the page that appears, use
the
and
to select the relay units
(REMOTE RELAY INTERFACE...)
that manages the service you
want to activate, then confirm
the selection with ENTER.
The menu is only visible if there
are relay units in the system.
keys
keys
