Engine Preparation - Powermate PWLE0799.1 Manual Del Usuario

Assembly
(Continued)
• Save all instructions
C
How to Assemble the Wheels
1 . Right Rear Wheel assembly
a . Loosen Knob (6)
b . Using the wheel and rod assembly (11) insert rod
through bracket, adjust to desired position .
c . Tighten Knob (6)
2 . Left Rear Wheel
a . Install using Shoulder bolt (7), Wheel (4),
Sleeve (8), Washer (9)
b . Secure with M10 flanged nut (10)
3 . Front Wheel
a . Install on Right side of front arm using Bolt (1), M8
washer (2), sleeve (3) Wheel (4), and washer (t2) .
b . Secure with washer (2) and M8 nut (5) .

Engine Preparation

• Save all instructions
A
Engine Oil
NOTICE
Engine shipped without oil . Failure to add oil will result in
serious engine damage .
A bottle of engine oil is included with your edger . Refer
to the chart on the right for alternative oil types to use at
different temperatures . Always use a high quality detergent
oil classified "For Service, SG, SH, SJ" or higher. Do not
use special additives .
Always use recommended oil type . Using dirty oil or
incorrect oil type such as 2-stroke engine oil will shorten
engine life .
NOTE: Engine Oil Capacity is 355 ml (12 oz .) .
Questions? Call Toll Free at 1-800-737-2112
4
3
2
1
6
11
SAE
TEMP
-20
0
-30 -20 -10
Ambient Service Temperature
Copyright © 2019 MAT Engine Technologies, LLC
EN - 8
5
2
2
Front Wheel Assembly
4
10 7
8
9
Rear Wheel Assembly
SAE 10W-30
SAE 30
20 60 80
40
0 10 20
100° F
30 40° C