Important Safety Information - Powermate PWLE0799.1 Manual Del Usuario

Safety Definitions
• Save these instructions
Control and Operating Symbols (Continued)
Always check that the ground wires are connected before running the unit
WIRES MUST BE
DANGER
CONNECTED
Depth Control Lever: Move lever forward to increase cutting depth
INCREASE
CUTTING
DEPTH
Start Position
START
ENGINE
STOP
Start Lever: Release lever to stop engine . Engage lever to start/run engine
START /
RUN

Important Safety Information

• Save all instructions
Responsibility of Operator
1 . Carefully read and follow these safety instructions . Failure to do so can result in serious injury .
2 . Know your product . Read and understand this manual before use . Compare the illustrations to unit . Learn location
and function of all controls . Thoroughly understanding the unit before use will result in the best performance and safety .
3 . Follow all instructions when assembling the unit . If the unit was purchased in assembled condition, the operator must
check the unit carefully to make sure it was assembled according the instructions in the manual before use .
4 . Regularly inspect the edger . Make sure parts are not bent, damaged, or loose .
5 . Use this equipment for its intended purpose only .
6 . Operate the unit only with guards, shields, and other safety items in place and working correctly .
7 . Service the unit only with authorized or approved replacement parts .
8 . Complete all unit maintenance and adjustments according to the instruction in this manual .
WARNING
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State
of California to cause cancer and birth defects or other reproductive harm .
To prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug
wire and put wire where it cannot contact the spark plug .
Preparation Safety
WARNING
• Read, understand, and follow all instructions on the machine and in this manual . Be thoroughly familiar with the
controls and the proper use of the edger before starting . Know how to stop the engine quickly .
• Familiarize yourself with all the safety and operating decals on this equipment .
• Thoroughly inspect the area where the edger is to be used and remove all foreign objects . Your equipment can propel
small objects at high speed causing personal injury or property damage . Stay away from breakable objects, such as
house windows, auto glass, greenhouses, etc .
• Check that all nuts and bolts are tight and equipment is in good condition .
• Always check that the ground wire is connected before starting engine .
Questions? Call Toll Free at 1-800-737-2112
(Continued)
EN - 3 Copyright © 2019 MAT Engine Technologies, LLC