Delay Mode - VWR SAS Super DUO Manual Del Usuario

Switch on the instrument and wait until the main screen is displayed:
Press the "▼" or "▲" arrows to reach the
Press the 'ENTER' button, now you can scroll the eight user-selectable sampling volumes.
Once the sampling volume to be modified has been reached, press the 'ENTER' button to confirm.
The display will show the old and the new volume.
Press the "▼" or "▲" arrows to select the first digit and press 'ENTER' to confirm
Press the "▼" or "▲" arrows to select the second digit and press 'ENTER' to confirm. Repeat the previous step until
the last digit is reached. When the last digit is confirmed, the new volume will be memorised and added to the list of
eight user-selectable volumes. If you want to start a sampling cycle with the new value you have to enter the USER
MODE and select it by using the procedure described in the USER MODE paragraph.

'DELAY MODE'

With this function it is possible to delay the beginning of the sampling cycle. If a delay has been selected, the
sampling cycle will begin after the selected delay time.
Switch on the instrument and wait until the main screen is displayed:
Press the "▼" or "▲" arrows to reach the
Press the 'ENTER' button, the delay time is displayed
Select the desired delay time with the "▼" or "▲" arrows. The selectable delay values are 1, 2, 3, 5, 10 or
START FOR XXX
MM/DD/YY - HH:MM
PROGRAM MODE
MM/DD/YY - HH:MM
S.PROG XXXX
MM/DD/YY - HH:MM
XXX → 0000
MM/DD/YY - HH:MM
XXX → X000
MM/DD/YY - HH:MM
START FOR XXX
MM/DD/YY - HH:MM
DELAY MODE
MM/DD/YY - HH:MM
DELAY 01 MIN
MM/DD/YY - HH:MM
13