Screw the Wi-Fi antenna to the docking station. This magnet base must be stuck to the back of the boiler.
Once assembled, the unit has to remain in a vertical position.
Antenna.
Magnet connection base.
Place the magnet connection base with the antenna where appropriate. When possible, avoid the presence
of metal sheets around the antenna as the WiFi signal might be distorted.
WiFi upper view.
If the stove that you have is an Eco I Insert or Eco II, you must fix the safety thermostat to the panels of the
insert model. These panels have a hole, through which you must insert the thermostat (
and fix it to the socket with a nut (
model, showing the final result in the drawing 15.
For Ecoaire you must do the same process.
Drawing 14
5.
CLEANING AND MAINTENANCE.
To ensure the correct operation of your stove, the following cleaning and maintenance operations are
necessary at the indicated frequency. The stove must always be cold.
The deterioration of the stove parts by a lack of cleaning involves the loss of the two-year warranty offered
by ECOFOREST (see warranty section).
ASSEMBLING OF THE SAFETY THERMOSTAT IN INSERT MODELS.
) and finally you screw the stopper ( ). The stove used in drawings is an EcoII
WiFi plan view with no metal objects around.
34
Drawing 13
) according to drawing 14,
Drawing 15