Sizing The Device - Orthofix SPINAL STIM 5212CE Manual De Instrucciones

Sizing the Device

For minor size adjustments, adjust the placement of the
front Velcro Strap. For further adjustments, follow the
steps below.
1. Place the SpinalStim device around the body to
determine how much adjustment is needed.
• Note: when properly adjusted, the coils should be
centered on the body. The Control Unit should be
in front, LCD facing up.
2. If a significant size adjustment is needed, lay the unit flat
with the outside of the device Velcro Panel facing up.
Control Unit
Velcro Panel
Front Coil
3. To adjust the Back Coil, open the Strap Lock.
Strap Lock
9
Velcro Strap
Side Clip
Back Clip
Back Coil
Strap Lock
Back Coil