Use - Agilent Technologies TwisTorr 304 FS Serie Manual De Istrucciones

The TwisTorr 304 FS on board belongs to the second installation (or overvoltage)
CAUTION!
category of the EN 61010-1 standard. Therefore, connect the device to a mains
line that complies with the above category. The TwisTorr 304 FS on board has
Input/Output and serial communication connectors that must be connected to
external circuits in such a way that no live parts of electronic board are
accessible. Make sure that the insulation of the device connected to the
TwisTorr 304 FS on board is adequate even in the case of a single fault as per
the EN 61010-1 standard.
For installation of optional accessories, see "Technical Information".

Use

This paragraph details the main operating procedures. Prior to
operating the Turbo controller, make all vacuum manifold and
electrical connections, referring to the Turbo pump instruction
manual.
TwisTorr 304 FS on board Controller User Manual / 87-901-028-01 (C)
Instructions for Use

Use

137/178
16