Automatic; Light Switching Version - APRILIA SR 50 Uso Y Mantenimiento

Make sure that the tyres always have their
valve sealing (2) caps on, to prevent them
from suddenly going flat.
Change, repair, maintenance and balanc-
ing operations are very important and
should be carried out by qualified techni-
cians with appropriate tools.
For this reason, it is advisable to have the
above mentioned operations carried out
by an aprilia Official Dealer or by a quali-
fied tyre repairer.
2
3
If the tyres are new, they may still be cov-
ered with a slippery film: drive carefully
for the first miles. Do not oil the tyres with
unsuitable fluids.
MINIMUM TREAD DEPTH LIMIT (3)
front: .............................................. 1,5 mm
rear: ............................................... 1,5 mm
However, the minimum tread depth must not
be less than prescribed by regulations in
force in the country where the vehicle is used.

AUTOMATIC

LIGHT SWITCHING VERSION

The vehicles provided with the Automatic
Switch-on Device can be immediately rec-
ognized, since the lights come automatically
on as soon as the engine is started.
For this reason the light switch has been re-
placed with a dimmer switch "
The lights can be switched off only by stop-
ping the engine.
Before starting the vehicle, make sure that
the dimmer switch is in position "
low beam).
use and maintenance SR 50
- ".
" (front
29