Circle Vial; Laser Plummet - Prexiso T.O.2 Manual De Usuario

5.2 Circle Vial

Inspection and
Adjustment

5.3 Laser Plummet

Turning the laser
plummet on/off
Inspection
With turned on instrument turn on the laser plummet by pushing the
the keyboard. To turn off the laser plummet, press the
1. Set the instument on the tripod (no adjustment is required).
2. Place the cross mark excactly under the instrument.
3. With turned on instrument turn on the laser plummet by pushing the
4. Turn the instrument for 180°.
After making sure that the long water
level is correctly adjusted, check if there is
any off-center with the round water level.
If there is no off-center, no adjustment is
required; otherwise, adjust the three
adjustment screws with needle as shown
to center the bubble.
button again.
button on
button.
T.O.2 | 31